Cross Pads

Cross Pads

Abrasive Cross Pads are used for deburring, blending and polishing of tubing and cylinders. General made with aluminum oxide, but can be made in other materials.  For use with threaded mandrels. Minimum 100 pieces. Other sizes and abrasive grits available. 

 

Threaded Mandrels

Fits Eyelet P/N Shank Dia. Length Each
PA-3-48 70-0075 1/4" 3" 2.795
PA-8-32 70-0057 1/4" 3" 2.795
PA-1/4-20 70-0060 1/4" 3" 2.795
Length / Width Grit P/N Each
3/4" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 60 66-0140 0.964
3/4" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 80 66-0141 0.964
3/4" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 120 66-0142 0.964
Length / Width Grit P/N Each
1" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 60 66-0143 0.984
1" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 80 66-0144 0.984
1" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 120 66-0145 0.984
Length / Width Grit P/N Each
1-1/2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0146 0.808
1-1/2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0147 0.808
1-1/2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0148 0.808
Length / Width Grit P/N Each
1-1/2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0149 0.915
1-1/2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0150 0.915
1-1/2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0151 0.915
Length / Width Grit P/N Each
2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0152 0.878
2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0153 0.878
2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0154 0.878
Length / Width Grit P/N Each
2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0155 0.948
2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0156 0.948
2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0157 0.948
Length / Width Grit P/N Each
2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0158 0.948
2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0159 0.948
2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0160 0.948
Length / Width Grit P/N Each
2" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 23,000) 60 66-0161 0.984
2" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 23,000) 80 66-0162 0.984
2" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 23,000) 120 66-0163 0.984
Length / Width Grit P/N Each
2" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 23,000) 60 66-0164 1.128
2" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 23,000) 80 66-0165 1.128
2" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 23,000) 120 66-0166 1.128
Length / Width Grit P/N Each
2-1/2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 18,000) 60 66-0167 1.081
2-1/2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 18,000) 80 66-0168 1.081
2-1/2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 18,000) 120 66-0169 1.081
Length / Width Grit P/N Each
3" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 14,000) 60 66-0170 1.544
3" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 14,000) 80 66-0171 1.544
3" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 14,000) 120 66-0172 1.544
Length / Width Grit P/N Each
3" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 14,000) 60 66-0173 1.761
3" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 14,000) 80 66-0174 1.761
3" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 14,000) 120 66-0175 1.761
Length / Width Grit P/N Each
4" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 60 66-0176 2.140
4" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 80 66-0177 2.140
4" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 120 66-0178 2.140
Length / Width Grit P/N Each
4" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 12,000) 60 66-0179 2.439
4" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 12,000) 80 66-0180 2.439
4" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 12,000) 120 66-0181 2.439
Length / Width Grit P/N Each
4 1/2" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 60 66-0182 2.736
4 1/2" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 80 66-0183 2.736
4 1/2" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 120 66-0184 2.736
Length / Width Grit P/N Each
5" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 60 66-0185 2.856
5" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 80 66-0186 2.856
5" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 120 66-0187 2.856
Length / Width Grit P/N Each
6" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 60 66-0188 3.690
6" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 80 66-0189 3.690
6" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 120 66-0190 3.690