Rotofinishers & Mandrels

Rotofinishers & Mandrels

Abrasive Rotofinishers are used for deburring and finishing of inside tube diameters. 80 grit part numbers shown. Available in grit range 80 to 320.

J TYPE - Angle cut for faster entry into tube or cylinder

S TYPE - Straight type for general tube deburring and finishing

Minimum order 100 pcs. per specification. Contact us for pricing and availability.

Pad No. Mandrel No. For Hole Sizes Size of Fillers Plies Grit S Type Part # S Type Each J Type Part # J Type Each
1 AR-1.5 3/4-1" 1-1/2" x 1-1/2" 4 80 41-35498 1.309 41-36490 1.557
2 AR-1.5 1-1-1/4" 2" x 1-1/2" 4 80 41-35512 1.720 41-36504 1.911
3 BR-2 1-1/4-1-1/2" 2"x 2" 6 80 41-35526 2.138 41-36518 2.376
4 BR-2 1-1/2-1-3/4" 2-1/2"x 2" 6 80 41-35540 2.567 41-36532 2.851
5 BR-2 1-3/4-2" 3"x 2" 6 80 41-35554 2.977 41-36546 3.308
6 BR-2 2-2-1/4" 3-1/2"x 2" 6 80 41-35568 3.405 41-36560 3.786
7 CR-3 2-1/4-2-1/2" 3-1/2"x 3" 8 80 41-35582 5.707 41-36574 6.341
8 CR-3 2-1/2-2-3/4" 4"x 3" 8 80 41-35596 6.696 41-36588 7.442
9 CR-3 2-3/4-3" 4-1/2"x 3" 8 80 41-35610 7.451 41-36602 8.280
10 CR-3 3-3-1/4" 5"x 3" 8 80 41-35624 8.386 41-36616 9.317
11 CR-4 3-1/4-3-1/2" 5"x 4" 8 80 41-35638 10.752 41-36630 11.947
12 CR-4 3-1/2-3-3/4" 5-1/2"x 4" 8 80 41-35652 12.301 41-36644 13.669
13 CR-4 3-3/4-4" 6"x 4" 8 80 41-35666 13.698 41-36658 15.220
14 CR-4 4-4-1/2" 6-1/2"x 4" 8 80 41-35680 14.867 41-36672 16.519

Rotofinisher Mandrels

# Dia. x Slot Overall Length Shank Part # Each
AR-1.5 3/8" x 1-1/2" 4" 1/4" 70-34893 35.124
BR-2 5/8"x 2" 4-1/2" 1/4" 70-34894 37.465
CR-3 3/4"x 3" 6-1/2" 3/8" 70-34895 204.184
CR-4 3/4"x 4" 7-1/2" 3/8" 70-34896 234.560