Cross Pads

Cross Pads

Abrasive Cross Pads are used for deburring, blending and polishing of tubing and cylinders. General made with aluminum oxide, but can be made in other materials.  For use with threaded mandrels. Minimum 100 pieces. Other sizes and abrasive grits available. 

 

Threaded Mandrels

Fits Eyelet P/N Shank Dia. Length Each
PA-3-48 70-0075 1/4" 3" 2.768
PA-8-32 70-0057 1/4" 3" 2.768
PA-1/4-20 70-0060 1/4" 3" 2.768
Length / Width Grit P/N Each
3/4" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 60 66-0140 0.955
3/4" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 80 66-0141 0.955
3/4" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 120 66-0142 0.955
Length / Width Grit P/N Each
1" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 60 66-0143 0.975
1" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 80 66-0144 0.975
1" x 3/8" 8 Ply (3-48 Eyelet) (Max RPM 25,000) 120 66-0145 0.975
Length / Width Grit P/N Each
1-1/2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0146 0.800
1-1/2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0147 0.800
1-1/2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0148 0.800
Length / Width Grit P/N Each
1-1/2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0149 0.906
1-1/2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0150 0.906
1-1/2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0151 0.906
Length / Width Grit P/N Each
2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0152 0.870
2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0153 0.870
2" x 1/2" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0154 0.870
Length / Width Grit P/N Each
2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0155 0.939
2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0156 0.939
2" x 1/2" 10 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0157 0.939
Length / Width Grit P/N Each
2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 60 66-0158 0.939
2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 80 66-0159 0.939
2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 23,000) 120 66-0160 0.939
Length / Width Grit P/N Each
2" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 23,000) 60 66-0161 0.975
2" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 23,000) 80 66-0162 0.975
2" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 23,000) 120 66-0163 0.975
Length / Width Grit P/N Each
2" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 23,000) 60 66-0164 1.117
2" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 23,000) 80 66-0165 1.117
2" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 23,000) 120 66-0166 1.117
Length / Width Grit P/N Each
2-1/2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 18,000) 60 66-0167 1.071
2-1/2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 18,000) 80 66-0168 1.071
2-1/2" x 3/4" 8 Ply (8-32 Eyelet) (Max RPM 18,000) 120 66-0169 1.071
Length / Width Grit P/N Each
3" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 14,000) 60 66-0170 1.529
3" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 14,000) 80 66-0171 1.529
3" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 14,000) 120 66-0172 1.529
Length / Width Grit P/N Each
3" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 14,000) 60 66-0173 1.744
3" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 14,000) 80 66-0174 1.744
3" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 14,000) 120 66-0175 1.744
Length / Width Grit P/N Each
4" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 60 66-0176 2.119
4" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 80 66-0177 2.119
4" x 1" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 120 66-0178 2.119
Length / Width Grit P/N Each
4" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 12,000) 60 66-0179 2.415
4" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 12,000) 80 66-0180 2.415
4" x 1" 10 Ply (1/4-20 Eyelet) (Max RPM 12,000) 120 66-0181 2.415
Length / Width Grit P/N Each
4 1/2" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 60 66-0182 2.709
4 1/2" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 80 66-0183 2.709
4 1/2" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 12,000) 120 66-0184 2.709
Length / Width Grit P/N Each
5" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 60 66-0185 2.828
5" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 80 66-0186 2.828
5" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 120 66-0187 2.828
Length / Width Grit P/N Each
6" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 60 66-0188 3.654
6" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 80 66-0189 3.654
6" x 1-1/2" 8 Ply (1/4-20 Eyelet) (Max RPM 7,500) 120 66-0190 3.654