Mini Flap Wheels

Mini Flap Wheels

Designed for use in tight areas and other intricate shapes and forms, this Abrasive Mini Flap Wheel can be used on stainless steel, steel, nonferrous metals, cast iron, plastic, rubber or wood. Other sizes available.

Dia x Width Grit P/N Each
3/8" x 3/8" x 1/8" (Min. 10) (Max RPM 40,000) 60 80-0520 3.566
3/8" x 3/8" x 1/8" (Min. 10) (Max RPM 40,000) 80 80-0498 3.566
3/8" x 3/8" x 1/8" (Min. 10) (Max RPM 40,000) 120 80-0571 3.566
3/8" x 3/8" x 1/8" (Min. 10) (Max RPM 40,000) 180 80-0572 3.566
Dia x Width Grit P/N Each
5/8" x 5/8" x 1/8" (Min. 10) (Max RPM 40,000) 60 80-0573 3.825
5/8" x 5/8" x 1/8" (Min. 10) (Max RPM 40,000) 80 80-0531 3.825
5/8" x 5/8" x 1/8" (Min. 10) (Max RPM 40,000) 120 80-0574 3.825
5/8" x 5/8" x 1/8" (Min. 10) (Max RPM 40,000) 180 80-0575 3.825
Dia x Width Grit P/N Each
5/8" x 3/4" x 1/8" (Min. 10) (Max RPM 40,000) 60 80-0668 3.957
5/8" x 3/4" x 1/8" (Min. 10) (Max RPM 40,000) 80 80-0669 3.957
5/8" x 3/4" x 1/8" (Min. 10) (Max RPM 40,000) 120 80-0670 3.957
5/8" x 3/4" x 1/8" (Min. 10) (Max RPM 40,000) 180 80-0671 3.957
Dia x Width Grit P/N Each
3/4" x 3/4" x 1/8" (Min. 10) (Max RPM 35,000) 60 80-0524 3.957
3/4" x 3/4" x 1/8" (Min. 10) (Max RPM 35,000) 80 80-0508 3.957
3/4" x 3/4" x 1/8" (Min. 10) (Max RPM 35,000) 120 80-0499 3.957
3/4" x 3/4" x 1/8" (Min. 10) (Max RPM 35,000) 180 80-0576 3.957
Dia x Width Grit P/N Each
1 3/16" x 1/8" x 1/8" (Min. 10) (Max RPM 35,000) 60 80-0672 3.631
1 3/16" x 1/8" x 1/8" (Min. 10) (Max RPM 35,000) 80 80-0673 3.631
1 3/16" x 1/8" x 1/8" (Min. 10) (Max RPM 35,000) 120 80-0647 3.631
1 3/16" x 1/8" x 1/8" (Min. 10) (Max RPM 35,000) 180 80-0674 3.631
Dia x Width Grit P/N Each
1 3/16" x 3/16" x 1/8" (Min. 10) (Max RPM 35,000) 60 80-0675 3.631
1 3/16" x 3/16" x 1/8" (Min. 10) (Max RPM 35,000) 80 80-0501 3.631
1 3/16" x 3/16" x 1/8" (Min. 10) (Max RPM 35,000) 120 80-0502 3.631
1 3/16" x 3/16" x 1/8" (Min. 10) (Max RPM 35,000) 180 80-0676 3.631